CIMC 100ton 4 Axle Low Bed Container Trailer for Sale

A customer from Nigeria customized a CIMC 100ton low bed container trailer. This customer first saw our product on Alibaba, and left his phone number and product information of interest on the platform. After our sales contacted the customer, we sent the customer a more detailed product catalog and quotation. The customer confirmed the size and configuration of the low bed container trailer and paid the deposit. After the factory completed the production of the vehicle, the customer paid the final payment, 4 axle low The paint color of the bed trailer is ready to be shipped after spraying according to the customer's requirements.

CIMC 100ton Low Bed Container Trailer for Sale

What is it about the slanting direction of the 100ton low bed container trailer?

4 axle low bed trailer is a kind of commonly used semi trailer, but the driving of low bed container trailer still need to pay attention to a lot of problems, the following is to talk about how low bed semi trailer slanting direction happened.

1. The vehicle deviation is mainly because the distance between the traction pin center and the corresponding points on both sides of the axle is different (three points are not isosceles triangle). If the deviation is out of alignment, it may cause abnormal tire wear (serrated phenomenon).

2. Detection and adjustment method:

(1) Park the 100ton low bed container trailer on the level road without braking.

(2) Take a point on the inner surface of the front wheel hub of the front axle, and take a point on both sides of the left and right, and the position is symmetrical.

(3) Take the traction pin center as the reference, measure the distance to the above two points, the requirement is "L1-L2 3mm. If the deviation is out of line, adjust the front axle live tie rod until it meets the deviation requirements.

(4) Before measurement, check the measured value at the corresponding point of the rear axle hub, and 2m is required. If out of tolerance, adjust the rear axle live tie rod, make the front and rear axis parallel, until the deviation meets the requirements.

(5) Tighten the fastening bolts on the front and rear pull rods.

(6) After the adjustment, drive 4 axle low bed trailer about one kilometer, stop at the same place without braking, and check the above size. If there is no change, the adjustment is successful.

(7) The adjustment process should make the tie rod in working state, that is, once the tie rod is rotated, the vehicle bearing moves, the adjustment of the tie rod is normal.

CIMC 100ton 4 Axle Low Bed Trailer for Sale

How to keep cargo stable on a 100ton low bed container trailer

1. Increase the scale of base

You can increase the size without automatically increasing the stability by increasing the size of the support. Increase your strength in the direction of obstruction.

One way to increase the size of a base is to increase the base support by changing the location so that the widest part of the object is on the ground. Another approach is to increase the number of contact points with the ground where possible.

For some larger objects, you may need to create more touch points by changing the packaging or changing the location. In addition, low bed trucks used to transport machinery can be widened with the necessary accessories to increase the size of the working platform.

2. Increase friction

The stability of an object is affected by the level of frictional resistance between one or more contact points and the foundation or ground. When the frictional resistance is low, the object will slide or even slip on the ground. So, increased friction equals improved stability, especially on smooth surfaces. Select a surface with rough packaging when considering the surface of the contact point.

Sometimes shippers may use wood chips on the sold low bed trailers to keep the weight with smooth surface stable. You can add any other rough material to the floor or base to increase friction, as long as it does not damage the object.

3. Lower center of gravity

The position of the center of gravity of the supporting base determines the stability of the object. If the position is above the base, the higher the pile, the less stable the object will be. This explains why objects piled high tend to tip over.

The way to increase stability is to lower the center of gravity or reduce the distance between the center of gravity and the ground. Therefore, a double deck towing plate is a good choice to lower the center of gravity.

When carrying high objects, the object should be dumped before being carried, rather than carried upright. When you tilt a tall object or any other object, you may automatically lower the center of gravity.

CIMC 100ton 4 Axle Low Bed Container Trailer for Sale

4. Slow down

High speed increase the chance that it will roll over. But speed does not affect the center of gravity of an object, but determines how much force an object reacts to an external force. For example, if you are transporting an object at high speed with a 4 axle low bed trailer, suddenly stopping or hitting an obstacle will cause the object to tip over. At high speeds, sometimes applying the brakes can cause objects to fall or slide. Walking at a low speed helps to keep the center of gravity or balance in the same position if you are carrying something.

5. Driving skills

Drivers drive steadily, which can be improved through training. Place the object at the center of the supporting base. The vertical projection of the center of gravity should be at the center of the supporting base. In other words, the equilibrium point should be at the bottom of the object's stability or at the center of the ground.

When a 4 axle low bed trailer or transporter changes its momentum, anything placed on the edge of the trailer is likely to fall. By placing an object in the center, you stabilize the center of gravity and prevent the object from falling.