CIMC 2 Axle Flat Bed Trailer for Sale

This customer from Guyana bought two 2 axle flatbed trailers. This customer has previously engaged in transportation-related work, and is now responsible for the company's transportation vehicle import work. This customer knew about CIMC brand semi-trailers before and had seen CIMC brand semi-trailers locally, so this time he directly chose to purchase CIMC 40ft flatbed trailer. The customer's import procurement experience is quite rich, but he is worried that this large vehicle will be damaged during transportation. Our sales also talked with customers about a lot of cargo transportation issues, and we will cover the vehicles with rain cloth, hoping that customers can receive the 2 axle flatbed trailer smoothly.

CIMC 40 Foot Flatbed Trailer for Sale

Some driving operation you should know when driving a flatbed trailer

Check before you start

1. Whether the tire pressure of the truck head and semi trailer is the predetermined value.

2. The air pressure of the spare tire, whether it is correctly installed on the spare tire frame and whether the nut is locked.

Start the engine and observe the barometer in the cab.

3. Press the tractor's handbrake, you will hear an obvious sound of rapid deflation, see the brake cylinder push rod retract, and then release the parking brake.

4. Check whether there is air leakage in the air circuit and whether the brake system is working normally.

5. Check whether the gas lamp is working normally and whether the electrical connection is good.

CIMC 2 Axle Flat Bed Trailer for Sale 

Start

After confirming that all inspections are normal, continue to increase the pressure of the brake system, and then start smoothly according to the operating requirements of the forklift head, and check whether the braking of the entire vehicle is reliable.

Driving

1. Prevent the semi-suspension brake system from being used for a long time, avoid the brake system pressure from being too low, and avoid the emergency relay valve from automatically braking the wheels. There is an automatic brake lock.

2. To prevent the brake drum from overheating on long or steep slopes, please use the forklift engine brake device to brake as much as possible.

3. Pay attention to the height limit signs on the road to avoid collision with the equipment on the road.

CIMC 40 Foot Flatbed Trailer for Sale 

Separate the overhead semi trailer from the truck head

1. Try to choose a flat and flat ground to separate the semi 2 axle flatbed trailer from the truck head. If the foundation is soft or the asphalt road is to be separated in summer, a thick plank should be placed at the bottom of the lifting feet to prevent reconnection due to sinking loads.

2. Operate the lifting foot so that the bottom of the lifting foot is on the ground, then shift to a low speed gear and lift the semi trailer, leaving a certain distance away from the forklift head.

3. Unplug the plug from the wire connection socket of the 40 foot flatbed trailer for sale.

4. Turn off the overhead trailer air connection disconnect switch on the truck head, and then change the low speed position to remove the tractor air connector from the semi-trailer.

5. Pull out the traction seat to unlock the lever, thereby opening the locking block.

6. Slowly push the tractor forward to disengage the traction pin from the traction seat to separate the semi-trailer and the tractor.

7. After separation, check whether all parts of the semi 2 axle flatbed trailer are abnormal, and then loosen the drain valve at the bottom of the cylinder to drain the water in the cylinder.

Loading the container

Before loading the high bed semi trailer into the container, the used rotary lock head should be completely overlapped with the lock base and fixed. Then place the container correctly on the semi-automatic tray