Volume: 33000 liters
Suspension: Mechanical Suspension
Material: Stainless steel
Size: 11000mm*2500mm*3700mm
CIMC fuel tank trailer can be designed in different capacities to carry 40,000 litres, 45,000 litres, 54,000 litres, up to 90,000 litres of liquid.
CIMC offer carbon steel, stainless steel or aluminum material tanker trailers. The axles can be Fuwa / BPW with different ton nages by your need with price differences.The suspensions can be Air suspension, mechanic (leaf spring suspension), bogie suspension, etc.
Simply tell us the variety of materials to be transported, particle size,density, and desired tank capacity and weight, and will design according a suitable fuel tank semi trailer model.
CIMC 33000 liters fuel tank trailer for sale
CIMC 3 axle stainless steel tank trailer for sale
CIMC fuel tanker trailer production workshop
1. Connect the ground wire before filling the oil, and often check its intact condition. We also need to pay attention to whether the grounding resistance meets the anti-static standard.
2. The crane pipe must reach the bottom of the stainless steel tank trailer when filling oil, the pipe mouth should be kept at about 15cm from the bottom of the tank, and the initial filling speed should be strictly controlled within 1m/s, until the oil outlet is submerged, then gradually increase the flow rate, but The maximum flow velocity should not exceed 4.5m / s to prevent electrostatic accidents caused by spraying.
3. After the oil filling is completed, the ground must be disconnected after 5 minutes of oil stabilization. Because after the oil is installed, the oil surface potential will remain for several minutes because the oil flows in the tank.
Dimension | 11000mm*2500mm*3700mm |
Volume | 33000liters |
Application | transport Fuel, Oil, Diesel |
Tank Body | |
Material | Carbon steel |
Tank body and separate compartment plate | 6mm |
Compartments | 1 to 7 compartments, based on customer needs |
Manhole cover | Carton steel or Aluminum alloy API manhole cover 500mm (diameter) |
Discharge valve | Diameter is 3 or 4 inch |
Chassis | |
Axles | 3 units, FUWA/BPW/CIMC/other |
Tire | 12 units, Brand can be optional |
Landing Gear | JOST brand |
King Pin | JOST brand 2.0 or 3.5inch(bolted or welded type) |
Suspension | Mechanical suspension or air suspension |
Brake System | WABCO |