CIMC Road Aluminum Fuel Tanker Trailer 42000 Litres

Product Description:

CIMC Aluminum Tanker Trailer uses a professional tank rolling machine. One side in shape by two sides technology ensures that the welding without defects, oil leakage does not occur, and the safety factor of the tanker trailer is improved.

The road tanker chamber is separated into several sections by upright walls or partition walls. These walls prevent the formation of the petrol wave when the tank trailer is driving on a bumpy road. At the lower end of the wall, through-holes are drilled to reduce the impact and enhance the tank strength.

CIMC Road Aluminum Fuel Tanker Trailer 42000 Litres for Sale with Best Price

CIMC 3 axle fuel tanker trailer for sale

Knowledge of Aluminum Tanker Trailer for sale:

1. The relevant certificates such as the vehicle driving license and the hazardous chemicals permit are complete.

2. The actual loading capacity shall not be greater than the approved loading capacity.

3. Equipped with two dry powder fire extinguishers over 4 kg, the location should be reasonable and easy to use.

4. The diesel fuel trailer is qualified by the qualified inspection department. The tank body and accessories are good and effective, with no damage or deformation affecting the strength, no serious corrosion, and no leakage.

5. The tank body must be provided with an electrostatic grounding terminal, and an obvious mark is painted on the terminal; install a conductive rubber towing zone, and keep it on the ground after filling with oil.

6. Install an effective fire cap on the exhaust pipe, and the circuit system should have a device for cutting off the main power supply.

Specification of Fuel Tanker trailer:

Overall dimension:11500mm * 2500mm *3700mm

Volume:45000liters

Application: Transport Fuel, Oil, Diesel

Material: Aluminum alloy

Axles:3 axles, FUWA/BPW/CIMC/other

Suspension: Air suspension

Tire:12 units

Compartments:1 to 7 compartments, based on customer needs

King pin:90#

Landing gear: JOST

Brake system: WABCO

Discharge valve: Diameter is 3 or 4 inch